Tu znajdziesz odpowiedzi na najczęściej zadawane pytania dotyczące ekspresów JURA. Wybierz linię produktową a następnie model, który Cię interesuje. Instrukcja obsługi w formacie PDF, porady dotyczące użytkowania i inne przydatne informacje pojawią się poniżej.

Wybierz model: IMPRESSA Z5 Generation II

  • Do góry

    Integrated cleaning programme

    The cleaning programme of your IMPRESSA Z5 Gen. II can be started at any time in two ways:

    • With a display prompt:

    When COFFEE READY / CLEAN is displayed, briefly press the maintenance button. CLEANING TIME 20 MIN / START YES appears. Press the maintenance button again. TRAY / GROUNDS EMPTY appears. Follow the instructions on the display.

    • Without display prompt:

    When COFFEE READY is displayed, press the Rotary Switch until an acoustic signal sounds and MAINTENANCE appears. Press the Rotary Switch to enter the programme item. CAPPUCCINO CLEANING appears. Now turn the rotary switch until MACHINE CLEAN is displayed. Press the Rotary Switch again. CLEANING TIME 20 MIN / START YES appears. Press the maintenance button and follow the instructions on the display.

    • Note: Your IMPRESSA ZF Gen. II will display COFFEE READY again if no other programme item is selected in the maintenance menu within about 5 seconds.
    • Tip: After the cleaning programme, remove the filler funnel for pre-ground coffee and clean it.
  • Do góry

    Integrated descaling programme

    Do not switch off your IMPRESSA Z5 Gen. II to start the descaling programme.

    The descaling programme of your IMPRESSA Z5 can be started at any time in two ways:

    • With a display prompt:

    When COFFEE READY / DESCALE is displayed, briefly press the maintenance button. DECALCIFYING TIME 45 MIN / START YES is displayed. Press the maintenance button again. TRAY / GROUNDS EMPTY appears. Now follow the instructions on the display.

    • Without display prompt:

    When COFFEE READY is displayed, press the Rotary Switch until MAINTENANCE is displayed. Press the Rotary Switch to enter the programme item. CAPPUCCINO CLEANING appears. Turn the Rotary Switch until MACHINE IS DECALCIFYING lights up. Press the Rotary Switch again. DECALCIFYING TIME 45 MIN / START YES now appears. Press the maintenance button and follow the instructions on the display.

    • Note: Your IMPRESSA Z5 Gen. II will display COFFEE READY again if no other programme item is selected in the maintenance menu within about 5 seconds.

    If MACHINE IS DECALCIFYING remains displayed for a long time, this means the descaling programme was started with too much liquid or water was replenished before the tank was empty.

    • Tip: Start the descaling programme again with 0.6 l water. All the water in the water tank is sucked out during the programme. Please do not replenish water until the display prompts you to do so.

    If COFFEE READY / DESCALE is displayed even though the CLARIS filter cartridge has been inserted, this means the filter was not activated in programming mode.

    • Tip: Remove the filter and run the descaling programme. Then insert a new filter and activate it in programming mode.
  • Do góry

    CLARIS filter change

    The filter change programme of your IMPRESSA Z5 Gen. II can be started at any time in two ways:

    • With a display prompt:

    When COFFEE READY / FILTER CHANGE is displayed, briefly press the maintenance button. CHANGE TIME 2 MIN / START YES appears. Press the maintenance button. INSERT FILTER / PRESS BUTTON appears on the display. Insert a new filter and turn the selector switch on the cappuccino frother to the Steam position n . Press the maintenance button again briefly. Your IMPRESSA Z5 Gen. II will now start to rinse the filter: FILTER RINSE.

    • Without display prompt:

    When COFFEE READY is displayed, press the Rotary Switch until MAINTENANCE appears. Press the Rotary Switch to enter the programme item. CAPPUCCINO CLEANING appears. Now turn the Rotary Switch until FILTER CHANGE is displayed. Press the Rotary Switch again. CHANGE TIME 2 MIN / START YES appears. Briefly press the maintenance button and follow the instructions on the display.

    • Note: The water may be slightly discoloured (this is not harmful to health).
    • Tip: The CLARIS filter cartridge should be replaced every two months if you do not prepare many beverages, even if no message appears on the display.
  • Do góry

    Cleaning the Easy Cappuccino frother / fine foam frother

    If the Easy Cappuccino frother / fine foam frother is to fulfil your coffee dreams, it needs to be cleaned regularly.

    • Tip: rinse the frother with fresh water after use. To do this, dip the hose in a container of water and draw off steam until only clean water flows.
    • Note: the Easy Cappuccino frother / fine foam frother can be completely disassembled for the purposes of giving it a thorough clean.
    • Tip: to ensure that all traces of milk are removed, we recommend using the Auto Cappuccino Cleaner from time to time.
  • Do góry

    Cleaning the Professional Cappuccino Frother / Professional fine foam frother

    If the Professional Cappuccino Frother / Professional fine foam frother is to fulfil your coffee dreams, it needs to be cleaned regularly.

    • Tip: rinse the frother with fresh water after use. To do this, dip the hose in a container of water and draw off steam until only clean water flows.
    • To ensure that all traces of milk are removed, we recommend using the Auto Cappuccino Cleaner regularly.
    • The Professional Cappuccino Frother can be completely disassembled for the purposes of giving it a thorough clean.
  • Do góry

    Coffee taste and coffee temperature

    Coffee taste:
    Are you dissatisfied with the coffee taste? A poor coffee taste may be due to the following possible causes:

    • The amount of powder (coffee strength) is not set according to your taste. Please note that the amount of powder can be selected individually for each beverage you prepare.
    • The descaling programme was performed with the CLARIS filter cartridge inserted. In this case, remove the filter, insert a new one and programme the machine as appropriate.
    • Your coffee beans are "sour". Empty the bean container and fill it with fresh beans.

    Coffee temperature:
    Is your coffee not hot enough? A coffee temperature that is too low may be due to the following possible causes:

    • The coffee temperature has not been programmed to HIGH. Please note that the temperature can be programmed individually for each coffee product ("LOW", "NORMAL" or "HIGH").
    • If you are not using a CLARIS filter cartridge, your machine might have built up limescale deposits. Check the water hardness, programme the machine accordingly, and perform descaling.
    • Tip: Pre-heat your cup!
  • Do góry

    Milk foam

    If the milk is not frothed, this means the cappuccino frother / fine foam frother is blocked. Remove the frother and clean it thoroughly.

    Please note that the nozzle always has to be cleaned well after preparing (frothing) milk.

    • Tip: Use the special JURA Cappuccino Cleaner for cleaning.
    • Note: The fat content of milk does not influence frothing. It is also possible to use low-fat milk.
    • Tip: If you do not use a CLARIS filter cartridge, you can run the descaling programme. Calcium deposits can also impair steam preparation.
  • Do góry

    Display and text messages

    CAPPU RINSE / COFFEE READY
    • Depending on the settings, the IMPRESSA Z5 Gen. II will prompt you to perform cappuccino rinsing immediately or 10 minutes after preparing cappuccino or milk. Place a receptacle under the cappuccino frother and briefly press the maintenance button. Rinsing is carried out.

    MACHINE DESCALE appears despite the CLARIS filter cartridge being used.

    The CLARIS filter cartridge was inserted but the machine was not programmed accordingly.

    • Tip: Remove the filter from the water tank and run the descaling programme. Then insert a new filter and programme the machine as appropriate.

    MACHINE IS DECALCIFYING is displayed for a long time.

    The descaling programme was started with too much liquid or fresh water was replenished too soon. All the water in the water tank must be sucked out during the descaling programme.

    • Tip: Perform the descaling programme again with 0.6 l water.

    FILL SYSTEM / PRESS STEAM are displayed alternately.

    There is no water in the system (e.g. after a repair), or the water tank and/or the CLARIS filter cartridge were not correctly inserted.

    • Tip: Insert the water tank without the filter and press the Steam button, then reinsert the CLARIS filter cartridge.

    COFFEE READY is displayed but the coffee does not taste good.

    The descaling programme has been run with a CLARIS filter cartridge inserted without the machine being programmed for using the filter.

    • Tip: Remove the used filter, insert a new one and programme the machine accordingly.
  • Do góry

    Everyday care

    To ensure that your IMPRESSA or ENA produces top-quality coffee and functions correctly, the machine should be cleaned and maintained on a daily basis. You should proceed as follows:

    • Empty coffee grounds container and drip tray every day and rinse with hot water.
    • Clean and de-scale the machine or change the CLARIS plus filter cartridge when instructed to do so in the display.
    • Wipe the machine surface with a damp cloth or wipe the coloured front panels with the JURA caring cloth.
  • Do góry

    Caramelised coffee beans

    To ensure that your machine provides satisfaction for a long time and to avoid repairs, please note that the grinder on your JURA coffee machine is not suitable for coffee beans that have been treated with additives (e. g. sugar) during or after roasting.

    Use of such coffee mixtures can result in damage to the grinder. Any repair costs incurred as a result are not covered by the warranty provisions.